The trough type cable tray is a kind of cable tray formed by pressing a whole sheet of steel plate. It is a completely closed type with good sealing and dust-proof performance. The trough type cable tray has a certain depth of the trough box, to better protect the power lines. It is suitable for a small cross-section and a large number of cable lines, such as laying computer cables, communication cables, thermocouple cables, and other highly sensitive system control cables. It has a good effect on shielding interference of control cable and protection of environmental cable in heavy corrosion.
Machine layout | Pneumatic | Hydraulic oil | power |
length 50m x width 4m x height 5m | pressure 0-0.7MPa.,0.5M³/min | 46# | about 78KW;380V/50Hz/60HZ |
Width of coil sheet | thickness of coil | Length of cable tray | Coil type |
120-940mm | 1.0-2.0mm | 3m/6m/etc | Galvanized steel |
The cable tray roll forming machine is a fully automatic production process, all different sizes can produce through machine auto adjustment to complete. We also can make your required machines.
The cable tray roll forming machine produces a cable tray, the width of the different sizes from 100mm to 900mm, height from 50 mm to 150mm.
all these sizes can be produced through main forming machine auto adjustment, one set of rollers can produce all sizes cable tray products, workers change the rollers distance. one set punching die can finish all sizes punching and cutting.
Decoiler—- straightening —- servo feeder —- punching /cutting — sheet conveying —- forming— collection
Forming width is adjusted by automatic forming wall moving, it also can adjust height and width quickly.
It has one piece of the remote control to control two sides of machine frames, it stops when it moves in the right position, it has size marks on top of the machine bed.
Forming machine consist of speed regulation alternating, reducer, high-precision linear rails, gearbox (left and right side), the crosswise adjusting mechanism, and one complete set of rollers.
One set of the roller can complete all types of cable trays.
The main body de-stressing processing; gear material is a 45 steel hard tooth surface.
Forming technology of the main forming machine is from Italy, it will guarantee high-precision.
The material of the roller is the GCr15 forging, after whole quenching then by numerical control processing, the degree of hardness can reach HRC58-62.