The cable tray cover roll forming machine developed and manufactured by BOSJ has the characteristics of fast speed, high punching accuracy, simple operation, and saving manual molding. While meeting your output, greatly saves time and cost
Flat and Flat Flanged cable tray cover type, these covers are available flat without flanges or flat Hat-shaped covers are designed to protect installations where the cables extend above the upper flanges of the tray.
1. The equipment is controlled by PLC, and multiple safety protections are set during normal production.
2. The bed is a welded steel plate. And it is tempered to eliminate internal stress and avoid deformation of the fuselage.
3. The forming frame is a cast-iron structure and has been tempered. High strength and long service life.
4. The material of the roll shaft is 40Cr/GCR15/GCR12/GCR12MOV (according to customer requirements)
5. The material of the forming mold is GCr15, quenched, and hardness: HRC56-62. 6. The transmission structure is gearbox transmission. Each forming frame has a gearbox, which can ensure the equipment over time, high-intensity operation, and long service life.
Decoiler —- straighten/leveler —- cutting —- forming — collection
NO. | Item | Unit | Parameter | Remark | |
1 |
Material | Type | galvanized sheet,strip steel,etc | ||
Strength of material sheet | Map | ≥350 | |||
Thickness of material sheet | mm | 0.6~2.0 | Adjustable | ||
2 | Profile sizes | mm | 100mm≤§≤650mm | Adjustable | |
3 | Production speed | m/min | Forming speed:about5 m/min | ||
4 | Material of roller | GCr15 quenching treatment | |||
5 | Drive type | Gearbox driven | |||
6 | Motor Power | kw | About 18Kw | ||
7 | Electric control system | PLC variable frequency control | |||
8 | Dimensions(Length*width*height) | m | 15X4X3.9 |
Closed tray type needs cover plate, cover plate’s function is mainly the function, the dustproof function and so on. Cover plate will be better, whether vertical or horizontal installation of Cable Bridge, it is recommended to set the cover, and should be locked, mainly to prevent small animals (such as mice) into the accident. Cover plate should be used for the cable tray in the place where dust is easy to accumulate. At the bottom of public passage or outdoor crossing road section, pad plate should be added or no hole tray should be used on the tray.
When the cable tray is installed under the iron plate or similar device with holes, the top layer of the tray must be provided with a protective cover; Another point if the cable tray vertical installation, from the ground within two meters of the site must be installed with a protective cover. If the cable tray is to be installed outdoors, shields must be installed on the top deck or on each deck. Cable tray is very important, need to do a good job in the corresponding protection, so as to avoid the occurrence of danger.
After-sales service: one year warranty